Yes — DMS Electrical is based on Avery Hill Road in New Eltham SE9 2BD. Our engineers cover SE9, Eltham, Sidcup, Mottingham, Chislehurst, Blackfen, Welling, Bexley and beyond. Call us on 01322 420140 or use the form above to book a free site survey.

Yes. Since 1 April 2021, all private landlords in England must hold a valid Electrical Installation Condition Report (EICR) for every rental property, renewed at least every five years (or sooner if the report recommends it). We issue fully compliant EICR certificates across New Eltham and SE9, and carry out any required C1 or C2 remedial work.

Yes. DMS Electrical is an OZEV-approved installer, which means our EV charger installations are eligible for government grant schemes. We install home and workplace chargers across New Eltham and South East London, and advise on the right charger for your vehicle, property and electrical supply.

An EICR typically takes 3–4 hours for an average-sized home, or up to a full day for larger commercial properties. The time depends on the number of circuits and the age of the installation. We aim to cause minimal disruption and provide a written certificate on completion.

Yes. DMS Electrical works with businesses, landlords, schools and commercial property managers across South East London. We handle fit-outs, LED upgrades, PAT testing programmes, fixed wire testing, emergency lighting, CCTV, and data cabling — all documented and signed off to the required standard.

Yes. All DMS Electrical engineers are work to the 18th Edition IET Wiring Regulations. We are a NICEIC Approved Contractor and OZEV-approved EV charger installer — every installation is independently certified and backed by the NICEIC guarantee scheme.

An EICR uses a coding system to classify any faults or deficiencies found during the inspection. A C1 (Danger Present) means there is an immediate risk of injury — remedial work is required before the installation can be used safely. A C2 (Potentially Dangerous) means the fault poses a potential risk and must be addressed urgently, though it is not immediately life-threatening. A C3 (Improvement Recommended) means the installation does not meet current standards but does not present a safety risk — remedial work is advisable but not required for the certificate to be issued. Only C1 and C2 codes result in an unsatisfactory EICR. DMS Electrical carries out all required C1 and C2 remedial work and re-tests to ensure your certificate is fully compliant.

The cost of a home EV charger installation typically starts from around £800–£1,000 all-in for a standard 7kW smart charger, including supply and installation. Workplace and commercial installations vary depending on the number of charge points, cable run length, and whether a supply upgrade is required. As an OZEV-approved installer, DMS Electrical can advise on what grants are available to reduce your upfront cost. Contact us for a free site survey and written quote.

Two main government schemes are currently available. The EV Chargepoint Grant provides eligible renters, flat owners and landlords with up to £500 off the cost of a home charger. Note that standard homeowners of detached or semi-detached properties are not eligible — the scheme was restricted to renters, flat owners and landlords in 2022. The OZEV Workplace Charging Scheme (WCS) provides businesses, charities and public sector organisations with up to £500 per socket, across a maximum of 40 sockets per applicant — a total of up to £20,000. Both schemes run until March 2027, after which the WCS closes permanently. As an OZEV-approved installer, DMS Electrical handles the grant application process as part of the installation. Eligibility conditions apply; we can confirm your eligibility during the survey.

PAT testing (Portable Appliance Testing) is the process of inspecting and electrically testing portable equipment to check it is safe to use. It covers items such as computers, monitors, kettles, extension leads, power tools and any other equipment connected via a plug. There is no legal requirement to have PAT testing carried out at a specific frequency, but employers and landlords have a duty under health and safety legislation to ensure electrical equipment is maintained in a safe condition — and PAT testing is the standard way to demonstrate that. Most insurers and local authority inspection regimes expect it. DMS Electrical provides PAT testing for businesses, landlords and schools across New Eltham and South East London, with full written records and labelled equipment on completion.